Hardware
| Product | Why do I need this? |
|---|---|
|
Connects your appliances to our dashboard over Wi-Fi or Ethernet |
|
|
Connects your appliances to our dashboard over Wi-Fi, Ethernet, or SIM Card |
|
Measures current of 3 cables and reports the combined total. Choice of 80A per phase, all the way up to 500A and above. Price increases with clamp size
What do I need to install this? |
|
Measures gas or waterconsumption every ten minutes by connecting to an existing meter. Connects via BLE (Bluetooth Low Energy). |
|
Measures gas or waterconsumption every ten minutes by connecting to an existing meter. Connects via NB-IoT which has a 5 year battery life. |
|
Counts the LED or Infrared Pulses from the meter. |
|
Measures the consumption of appliances that are wired into the wall, and switches them on/off to save energy (used where a smart plug is not an option) |
|
Battery-powered sensors for indoor and outdoor use. Sensors connect to the Wireless Hub and act as a trigger for automations e.g. on/off. *The full list of GridDuck-compatible sensors is below this table. |
|
Relay for the distribution board. Measures consumption & switches on/off. |
|
Relay for outdoor appliances. Measures consumption & switches on/off |
|
Relay for the distribution board. Measures consumption & switches on/off |
|
Measures the consumption and allows automated on/off controls for individual appliances. |
|
Connects your appliances to our Wireless Hub. Measures electricity consumption and automatically switches appliances on/off to save energy |
*GridDuck is compatible with the following sensors:
Occupancy
Lumens
Motion
Vibration
Window Open
Door Open
Smoke
Heat
Water Leak
Soil moisture
Temperature
Temperature w/ Probe (Fridge/Freezer)
Humidity
Air Quality (VOC)
Carbon Monoxide (CO)
Atmospheric Pressure
Differential Pressure
Hydrogen Sulfide (H2S)
Ozone (O3)
Nitrogen Dioxide (NO2)
